Categories

Temperature Probes Accessories

Wide set of accessories for Thermocouples and Thermoresistances


Thermocouple Cables

Thermocouple Cables

  • Extension and compensation cables for Thermocouple
  • Conductors material B,E,J,K,N,R,S,T Type
  • Insulation and sheath in Silicon rubber, PVC, Teflon, Kapton, Fiberglass, Ceramic Fiber, Hyflon
  • Conductors section: 0,22/0,24/0,35/0,50/0,80 mmq (others on request)
  • Conductors number: 2,4,6 poles
  • Colouring: IEC, DIN, ANSI
  • Shielding on request

RTD’s Cables

RTD Cable

  • RTD Connection Cables
  • Connectors material: Copper, Nickel, Tined copper, silver Copper
  • Insulation and coating: Silicon rubber, PVC, Teflon, Kapton, Fiberglass, Hyflon and Food silicon rubber
  • Conduction section: 0,22/0,24/0,35/0,50/0,80 mmq (others on request)
  • Conductors number: 2,3,4,6 poles

Panel Connectors

Panel connector for temperature probes

  • Mignon and standard Panel Inserts for Thermocouple and Thermoresistance.
  • Female plugs 2 or 3 poles
  • Assembled by stainless bracket, fixing through two screws or clip
  • Assembled aluminum panel for Thermocouple and Thermoresistance, for installation in control room, testing bench, laboratory applications, pilot plant, etc

Miniature Connectors

Miniature connectors for temperature probes

  • Thermocouple and Thermoresistance connector.
  • Suitable to use with thin wires or oxide mineral insulated.
  • Polarised pin designed for excellent plug/socket connection
  • Easy conductors connection by sandwich shape setting-up.
  • Moulded Partitions to avoid short circuits
  • Strong one-single body.
  • Screws with head combined (cross and slotted)
  • Costruction material:
    – – Plastic: (Max Temperature 200°C)
    – – Thermosetting Resin combined with fiberglass (Max temperature 350°C)
    – – Ceramic (Max temperature 650°C)
  • Poles Numbers: 2 or 3 (the third contact used for earth wire, shield continuity or as third wire for RTD)
  • Colouring: ANSI, IEC, DIN

Standard Connectors

Standard connector for temperature probes

  • Thermocouple and Thermoresistance connector.
  • Polarised pin designed for excellent plug/socket connection
  • Empty or full Pins.
  • Cap with screw in the centre for quick wiring
  • Screw on the cap for easy assembly
  • Moulded Partitions to avoid short circuits
  • Easy conductors connection by sandwich shape setting-up.
  • Stainless steel Screws with Head combined (cross and slotted)
  • Strong one-single body.
  • Costruction material:
    – – Plastic: (Max Temperature 200°C)
    – – Thermosetting Resin combined with fiberglass (Max temperature 350°C)
    – – Ceramic (Max temperature 650°C)
  • Poles Numbers: 2 or 3 (the third contact used for earth wire, shield continuity or as third wire for RTD)
  • Colouring: ANSI, IEC, DIN

Thermowell

Thermowell

  • Heating elements protection from immersion or mecchanical damage, helping a durable operating of the heating elements.
  • Tube or full bar execution.
  • Materials in Stainless Steel 304, 310, 316,446, INCONEL600
  • The tube thermowell execution can be used when there is not mush stress or pressures and when the sheath lenght is very long.
  • The bar thermowell can be used when the heating element is exposed with high pressure or stress due to liquid process.

Compression Fittings

Compression fitting for Temperature Probes

  • Fix or sliding fittings in Stainless Steel or brass.
  • Tube passing diameters from 1mm to 32mm.
  • Conical or cylindrical thread.
  • Olives: Teflon, brass, steel.
  • Metric or inch connection.
Newsletter